Kidney Stent And Pregnancy

PICK UP HUMMER toy slot, step PICK UP HUMMER

Let adapt a toy car slot. We start with a remote control car that can find in the shops of Chinese good, nice and cheap. I will attach to a buggy chassis of Ninco.
removed, remove the stickers ..............

As the ceiling is rough and do not like the caulk ................

Review all failures body, not many cut out a little .............., chassis so that the body is not very high, the box is a shallow .....

I give it a coat of primer to mark it and work with the body clean ....

Prepare roll bars and present everything that I want to ........

I rods with rod to hold the tires ...........

submit the wheels, it seems that is well ................

Fabrico air filter model and remains of a plastic tube ..........

Putty the small door that leads into the case and prepare a leak in the mine the bic pen , with a couple left over, to remove the bad smoke ......

I crystals for the lights, turn signals and rearview mirrors to give more realism .................

I guard preparing carter ............................

few hands of black paint, start with the details of the roof and do the strip style "broken "....

also do the front and before had made some holes for the indicators, that will I do with rod painted ................

paint the silver part of the box, drivers and more details .....................

I check the width of the decal to paint the yellow ................

inside I'm ready, I make the seatbacks ................

has already dried yellow stripe ............................

We the decals, and the decor is that of the blog, which already had other cars, I adjust the decals to the area of \u200b\u200bthe body ................. the side ........

The rear ......................

And the front ...................

So it is becoming ....................

I keep the paint inside the drivers, first hand from yellow, spotted dress wrinkles and then paint them yellow ...................

I still have the old face and put some decals ...............

to prepare the remaining sheet of plastic , pinto miles account, account around and do a safety belt with masking tape and ride .............

So is the set ................

Step to ride the d and the box put the bar for tires, tires hit the and put the straps ................ ........

Again with the plate, hit the bag tools, straps a bit of detachment, to make them look more real and painted them a few shots in silver and black .......... .....

I put the drums of gasoline, I have put in the bottom a band with plastic to look like a metal support ...........

The straps of tires put them at different heights to make it look real, but not just to convince me .....................

amount roll bars ..............................

submit sump guard ......................

Change site wheel straps ................................ is better not to?

A hand protector ........................................

The Lighthouse crystals intermittent hardly be seen but you give details ...............

Especially when reflection ......................... give you notice the flashing of

the Pego the mirror with white tail .........................

Pego tail protector with a lifetime, is flexible and not stiffens the plastic , we avoid the shock breaks .............

Here you can see the pins to attach the body made mine bic pen ......... and as the protector is .................

reflection of the lens and placing the antenna ......................

I put axes truck tires balanced and covered with tacos, and the end is well ......

I hope you can be helpful and that you like

if you want to see more pictures of the finished car through the coordination finished cars. A SALUTE